Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Network issues

My S5 will not connect to my wifi network. I have upgraded to 6.1.1, I have run through the wifi setup dozens of times, I've reset everything, I've tried to download the wifi via USB twice. I've tried to connect via ethernet. Nothing seems to work. It won't even allow me to turn on the wifi or ethernet. Any suggestions for me?

  • Link to post
    Share on other sites
    Posted · Network issues
    On 2/9/2021 at 8:35 PM, mjhangge said:

    My S5 will not connect to my wifi network. I have upgraded to 6.1.1, I have run through the wifi setup dozens of times, I've reset everything, I've tried to download the wifi via USB twice. I've tried to connect via ethernet. Nothing seems to work. It won't even allow me to turn on the wifi or ethernet. Any suggestions for me?

     

    We have had the same issue a few times.  Power cycle and i have been able to get connected back to WIFI again.  The ethernet has never allowed us to enable it.  I have tried creating a config file and importing it but this did nothing.

  • Link to post
    Share on other sites
    Posted · Network issues

    Better than power cycle is to do the "cura connect reset" in the maintenance menu.  I think they changed the name in newer firmware - too lazy to turn on S5 and wait, sorry.  Don't do factory reset - the other one.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 5 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...