Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · michelangelo's david

Hi all, I'm having some real trouble with an amazing statue print. Michealangelo's david. I must have tried 20 test prints but there is always something wrong with it.

 

I'm using various standard PLA.

 

I've got close a few times but there is always an issue with the left arm/elbow or hair detail with the support settings. Even at 0.15mm. 0.4mm nozzle. 55% overhang support etc. Settings are attached below!

 

Can anyone suggest a better set of settings?

 

Please help,

 

Thanks

Screenshot 2021-02-10 at 11.03.32.png

IMG_9947.jpg

  • Link to post
    Share on other sites
    Posted · michelangelo's david

    Whatever part of David is touching support is going to be imperfect.  So I'd print him laying on his back.  Angled a bit so his head is almost touching the glass.  Will he fit that way?  Maybe diagonal with his head in one corner if you want him as big as possible.  This way all the "ugly" support surfaces will be on his back where people are less likely to look.

     

    Also, typically, that means much less support.

     

    If you decide not to do that then at least use the support blocker feature to block any support on his head other than his chin.  You don't need support for his nose or hair or ears as they barely stick out at all.

    https://support.ultimaker.com/hc/en-us/articles/360012869379-How-to-block-support-generation-in-Ultimaker-Cura

     

  • Link to post
    Share on other sites
    Posted · michelangelo's david

    From the photos the arms look fine.

     

    Well you can also lean David back as much as possible so most of the support is towards the back.  a 30 degree tilt should be enough that you don't need any support on the head - not even the chin.  You'll need it on the arm but it should attach farther back - more out of view when looking from the front.

     

    You could get a UM3 which uses PVA, dissolvable support and will give you a better quality.  🙂

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 6 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...