Jump to content
Ultimaker Community of 3D Printing Experts

PC1 With Marketplace Filament Extrudr GreenTec Pro: Filament will pulled out 5 seconds after finished the print


Recommended Posts

Posted · PC1 With Marketplace Filament Extrudr GreenTec Pro: Filament will pulled out 5 seconds after finished the print

Hi

 

I have the filament above in the PC1 (I use the Material Station). After each print, the print head goes back to the PC Switcher and at this point the display shows "Print finished". If I've already started a new print and I touch the "finished" button, the next print starts immediatly  (with the leveling first).

 

If I forget to touch the "finished" button, 5 seconds later the filament (and only the filament) in PC1 will be pulled back into the material station.

 

This malfunction is showed each printing and not only one time. That means, that every time the filament must pushed back into the bowden tube and the print core, makes a lot of "test strings" and then it's ready to print. The filament doesn't stay 2 hours in the PrintCore.

 

This is since 6.1.x

 

Roli

  • Link to post
    Share on other sites
    Posted · PC1 With Marketplace Filament Extrudr GreenTec Pro: Filament will pulled out 5 seconds after finished the print
    18 hours ago, Roli4711 said:

    I have the filament above in the PC1 (I use the Material Station). After each print, the print head goes back to the PC Switcher and at this point the display shows "Print finished". If I've already started a new print and I touch the "finished" button, the next print starts immediatly  (with the leveling first).

     

    If I forget to touch the "finished" button, 5 seconds later the filament (and only the filament) in PC1 will be pulled back into the material station.

     

    This malfunction is showed each printing and not only one time. That means, that every time the filament must pushed back into the bowden tube and the print core, makes a lot of "test strings" and then it's ready to print. The filament doesn't stay 2 hours in the PrintCore.

     

    This is since 6.1.x

     

    Roli

     

    If not defined by a material profile, the default value is: the material should stay in "parked" for 2 hours. Sounds like you might have an issue in your material profile. Is it generic? Or is it a selfmade one? What material is used? Do you have a spool of Ultimaker material and could you see how it works with say Ultimaker PLA?

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 5 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...