Jump to content
Ultimaker Community of 3D Printing Experts

Cura generating unnecessary build-plate support


Recommended Posts

Posted (edited) · Cura generating unnecessary build-plate support

I'm really struggling with an enclosure with holes in the vertical walls, where the 3mm screw holes are having external supports down to the build plate added, but the bigger 24mm holes are not.

cura-1.thumb.jpg.30988d4602878f7466dc3c08c52dcc41.jpg     
cura-2.thumb.jpg.9849e866cc552acae50394d0c89e6e98.jpg

 

The external support doesn't even connect with the support inside the hole - it's also filling some of the left of the big holes, which are otherwise perfect.

If I try to remove the support with support blocker I can only do it by including the hole - and all the support disappears (including the spurious support inside the big hole).
cura-3.thumb.jpg.269c57aa8986a3673b28027c4eb94b88.jpg        

 

All print settings are default, and I'm using single extruder. The support setting is left at everywhere because if I select touching buildplate I lose all "internal" supports (support blocker not set):

 

 cura-4.thumb.jpg.3b02e60f12447e0bed842439f86b60e1.jpg

 

Increasing the support overhang angle from 60 to 64 degrees removes some of the spurious support in the big hole, but the rest doesn't change.

Unfortunately, I've lost track of which settings I've changed in trying to resolve this, but nothing has removed these external supports which make the printed model unusable. 

Any thoughts would be appreciated!

 

Thanks


 

Edited by emtee
  • Link to post
    Share on other sites
    Posted (edited) · Cura generating unnecessary build-plate support
    39 minutes ago, fvrmr said:

    Hi @emtee to remove these towers, just disable the option use towers

    Well I'll be darned .... for some reason I didn't even think of these as towers <DOH!!>. Turning them off, certainly works.

    Thanks!! I should have asked the question 20 hours-of-trying ago.

    Edited by emtee
    • Like 1
    Link to post
    Share on other sites
    Posted · Cura generating unnecessary build-plate support
    On 2/16/2021 at 2:57 PM, fvrmr said:

    Haha 😉

     

    Nice to hear that it works! 


    Not sure why it does this in the first place, especially as it spills into the big hole - however, it turns out that the support inside the holes wasn't actually anywhere near the top of the holes, so wasn't doing anything and the holes print fine with selective removal of support.

    Thanks again for the help.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 5 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...