Jump to content
Ultimaker Community of 3D Printing Experts

Non so far funzionare la stampante


Ludovica_Gannoni
 Share

Recommended Posts

Posted · Non so far funzionare la stampante

Salve, mi chiamo Ludovica e ho 12 anni. Mi hanno regalato una stampante Labists mini 3d, ma a parte montarla non ho capito come poter caricare un modello 3d da stampare per iniziare. Qualcuno può aiutarmi? Ho scaricato Cura, ma ovviamente è vuoto.....non so proprio come iniziare

  • Link to post
    Share on other sites

    Posted (edited) · Non so far funzionare la stampante

    Hello Ludovica

    There are many steps.  There are just as many you-tube videos.  I don't know how many are in Italian but there should be some.  I think this is the official "how to print" video from Labists.

     

    #1 the print surface must be level, clean, and the exact correct distance from the nozzle.  In the Labist video you will see the bed being leveled.  Pay close attention.  If it isn't correct, the print will not stick and you'll just make a mess.  If you have trouble getting the print to stick to the surface you can use a light coat of hair spray to help keep the print in place.

     

    Instead of trying to use Cura (complicated and very tough for beginners), start with the Labist slicer that came with the printer.  For now keep it simple.  The Labist slicing program will have a definition file for your printer.  The Labist site also has information for you.  It is a beginner printer and rather than me confusing you, I think you should start there.

     

    I am attaching a 25 x 25 x 25 "Calibration Cube" that has letters on the side.  It is the type of thing used to check that a printer is working correctly.  Not exciting, but important.  It will need to be sliced in the Labist software and a gcode file then goes to the printer.

    Good Luck.

     

    If you have more questions please ask.  If you put my name in like this @GregValiant (type it slowly) I will get an email telling me that you have responded.

     

     

     

     

    X-Y Ref Block.stl

    Edited by GregValiant
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...