Jump to content

Schichthöhen beim Ultimaker 3 versus Ultimaker go


Fridolin

Recommended Posts

Posted · Schichthöhen beim Ultimaker 3 versus Ultimaker go

Ich bin vom Ultimaker go auf den Ultimaker 3 umgestiegen. Jetzt bin ich etwas überrascht das es die Einstellung „extra fine“ in Cura gar nicht mehr gibt. Auch  schichthöhen kleiner 0,1 werden in Cora nicht mehr angeboten. das der Nachfolger hier weniger bietet als der doch recht einfache Ultimaker Go überrascht mich.

 

Sind die Schichtdicken der kleinen 0,25 düse vorbehalten? Ich habe darüber noch in keinem Test etwas gelesen. Ist das beim Ultimaker 3s auch so?


ich wollte für Kleine Drucke das Maximum an Qualität erreichen. Jetzt bin ich etwas unsicher ob das so mit dem um3 klappt.

 

für eure Meinung dazu wäre ich dankbar.

 

  • Link to post
    Share on other sites

    Posted · Schichthöhen beim Ultimaker 3 versus Ultimaker go
    11 hours ago, Fridolin said:

    Jetzt bin ich etwas unsicher ob das so mit dem um3 klappt.

     

    Hallo @Fridolin,

     

    das klappt schon - auch die neuen Drucker können mit einer minimalen Schichthöhe von 0,02mm drucken.

    Es ist nur in den überwiegenden Fällen nicht sinnvoll. So kleine Schichthöhen verlängern einfach nur dramatisch die Druckzeiten, ergeben aber praktisch keinen erkennbaren Unterschied mehr am fertigen Objekt.

    Jedenfalls nicht mit der 0.4mm Standarddüse.

     

    Ich vermute, die Zielgruppe - die das trotzdem ausprobieren möchte - steht bei Ultimaker nicht im Fokus und ist so klein, daß Cura dafür keine vorgefertigten Druckprofile mitliefert. Das soll dich aber von nichts abhalten... 🙂

     

    Sehr kleine Objekte gelingen übrigens tatsächlich besser auf dem (mechanisch) kleineren Drucker. Jedenfalls solange wir uns in der Welt der FDM-Druckverfahren bewegen...

    So ist einfach die Physik - alle Verfahr-Wege sind kürzer, es ist weniger Masse zu bewegen, kürzere Zahnriemen haben weniger Spiel, die Material-Zuführung ist kürzer und direkter usw.

    Also gib den UM2Go noch nicht in die Schrottsammlung! 🙂

     

  • Link to post
    Share on other sites

    Posted · Schichthöhen beim Ultimaker 3 versus Ultimaker go

    Hallo,

    die Nichtverfügbarkeit des 0,06-Profils kann auch von Deinen gewählten Materialien abhängen. Bei mir blendet Cura dieses Profil (bei Nutzung von 0,4-Cores) vor allem aus, wenn TPU oder Breakaway im Einsatz ist. Auch die Verwendung bestimmter Düsendurchmesser kann zum Ausblenden mancher Profile führen.

    Grüße

  • Link to post
    Share on other sites

    Posted · Schichthöhen beim Ultimaker 3 versus Ultimaker go

    Danke für die Antworten. Ich Drucke mit Ultimaker pla und Ultimaker tought pla. Wird mir bei beiden Cores nicht angezeigt. 
     

    Der um3 ist Schon schick aber es wurmt mich das der 2go etwas schöner drucken kann. 
     

    Die druckzeit  spielt bei mir keine große Rolle. Vielleicht probiere ich es mal mit dem 0,25 printcore.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...