Jump to content
Ultimaker Community of 3D Printing Experts

Feature request: Remotely checking build plate and confirming that it is clear.


Recommended Posts

Posted · Feature request: Remotely checking build plate and confirming that it is clear.

Printer: Ultimaker 3

 

Current situation:

After finishing a print and removing it, the printer requires you to push the clickwheel to confirm the "print removed" message, otherwise it is not possible to start another print. This is a sensible safety feature.

The problem is that people are forgetful. It is not possible to trigger the message remotely, which means that you can't start a job remotely either without somebody being physically present to push the button. This ends up wasting a lot of valuable overnight and weekend printing time, when there is nobody present to push the button.

You could of course try to confront you colleagues ever more aggressively about pushing the button until they "get the message", but that doesn't seem the most conductive for a harmonious work environment. ;)

There is a thread that talks about disabling the safety feature completely. But I don't think that's the best way to go.
https://community.ultimaker.com/topic/29369-disable-print-removed-confirmation-message/

 

Solution:

Rather than trying to fix basic human psychology, the Ultimaker 3 already has the hardware to make a perfect solution. It has an integrated camera that can be viewed over the network. It should be perfectly possible to check the buildplate using the camera and confirm that it is clear. While some of the buildplate isn't visible in the lowest position, this could be solved by just raising the plate a little (possibly after an initial confirmation that there isn't a very tall print that's going to collide with anything, though this could also be solved by just checking the gcode of the last print).

  • Like 1
Link to post
Share on other sites
Posted · Feature request: Remotely checking build plate and confirming that it is clear.

Thanks for posting your request. Feedback like this helps us to understand how people are using the printers and how we can improve the workflow. 

I can't promise if or when this will be implemented but I like the request and forwarded it to our product owner.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...