Jump to content
Ultimaker Community of 3D Printing Experts

S5 limits nozzle temperature offset while printing


Recommended Posts

Posted (edited) · S5 limits nozzle temperature offset while printing

I started printing with Gizmodorks PVA filament and it says to NEVER print their filament above 200C because it can cause permanent damage and it causes stringing.

When printing I noticed that there is an limit that they have put on how much you can offset the temperature of a nozzle (+-25C). 

 

Could you make add a setting for advanced mode where you can edit this settings at your own risk?? I am not pleased that I paid orders of magnitude more for a "professional" printer, but have less control than my previous hobby Ultimaker.

 

-Alonso

Edited by alonsorobots
  • Link to post
    Share on other sites
    Posted · S5 limits nozzle temperature offset while printing

    The limit is only when you adjust the temperature on the fly during a print. You can set any temperature in Cura you want.

  • Link to post
    Share on other sites
    Posted · S5 limits nozzle temperature offset while printing

    Yup! It was just the suggestion that you be able to do it on the fly as well. I understand having some warning if you go below a threshold, but would also be nice to be able to do it. 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...