Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Hollow cavity for magnet

This topic is all over the place clear back to 2012.  I just can't get it to work for me.  The usual solution being "Check Union Overlapping Volumes"  This isn't working for me.

 

Attached is the file.  It is a corner piece for a plastic door.  It has 2 screw holes and an internal void for a magnet.  I already printed the internal cylinder and it is perfect fit for my magnet.  The grey spot shows up in Cura but when i click slice the void doesn't exist, cura does regular infill.  Any ideas on how to get this cavity to work?  

 

This was made in sketchup.  I have that file if anyone wants to look at the original, just looks like I can't attach it here.

 

I made 2 versions, the first had the cavity for the magnet, the 2nd had a double shell around the magnet with the theory of making a thicker wall and maybe cura would work with that.  Neither version made any difference.

corner finish.stl

  • Link to post
    Share on other sites
    Posted · Hollow cavity for magnet

    I looked at your stl carefully.  I had to uncheck "union overlapping volumes".  I don't know why you thought that should be checked.  It needs to be unchecked.

     

    Then it prints as your STL shows which may not be what you want.  It prints a donut shaped void in your part where you could insert a donut shaped magnet.

     

    I assume instead that your magnet is a solid cylinder?

     

    If so then you have 2 problems with your model:

    1) You have a double inner wall instead of a single wall to transition from "plastic" to "magnet".

    2) Your normals are backwards:

     

    In sketchup you want all walls that face air to be white and the side of every wall that faces plastic should be gray.  In sketchup to reverse them, right click on a wall and select "reverse faces".

     

    Again, "gray" should face plastic (interior) and white should face air or magnet.

     

    And uncheck "union overlapping volumes".

  • Link to post
    Share on other sites
    Posted (edited) · Hollow cavity for magnet

    Thank you for your help.

     

    Still no luck.

    I deleted the outer shell, left the grey cylinder, all white are facing inward.   Still no luck.  You can see in the first image that the cylinder is in the picture, but from the top view it is being ignored.

     

    1one.jpg

    2two.jpg

    Edited by Mentor115
  • Link to post
    Share on other sites
    Posted · Hollow cavity for magnet

    Solved.  

     

    I had generate support unchecked because there are no supports needed, however once "Make overhang printable" was unchecked it worked as it should.

     

    Thanks for everyone's time

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...