Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

  • 2 weeks later...
Posted · Cura profile for Selpic Star A

I made fillenium malcon.

1530902392_filleniummalcon.thumb.png.01947566a0dcbfb57e3046bb786872b0.png

Parameters

model: fillenium malcon https://www.thingiverse.com/thing:919475 thanks!

Layer: 0.1mm

height:112.8mm

infill: 10%

Print speed:60mm/s

Travel speed:120mm/s

Print Temp:190℃

Bed Temp:60℃

Bed leveling: auto https://www.thingiverse.com/thing:4831530

time:48hour

 

robin_nano_cfg.txt

>DEFAULT_ACCELERATION        11    #X, Y, Z and E acceleration for printing moves
>DEFAULT_XJERK             8    #Default Axis-X Jerk (mm/s)
>DEFAULT_YJERK             8    #Default Axis-Y Jerk (mm/s)
 

At first glance, the speed seems to be too fast, but in reality the acceleration and jerk are so small that it does not reach the maximum speed. Acceleration and jerk values were too small. I should have set it to a higher value.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...