Jump to content
Ultimaker Community of 3D Printing Experts

About my agony of managing profile settings


Recommended Posts

Posted · About my agony of managing profile settings

Hello you,
I love Cura. But one thing constantly drives me to despair: the material and print settings, saving and managing them.

The thing is that I like to adjust small settings here and there per material, which should be saved to the material.
But this is not possible without further ado.
The material library has only a few settings like temperature and retraction.
But what about the hundred other settings?
While the material library can be selected very distinctly, the print setting is very rigid, without subfolders or logical groupings.
 

I also find the message very confusing every time I change the print settings. In English it works somehow (but not well), in German it is totally weird.
I have been using Cura for 4 years now with a total of three printers. 
 

The material library seems to me to be the most useless function, because I can adjust these few settings faster than selecting the material.


Since there are hundreds of thousands of users who seem to be satisfied, the fault must be mine.

So now the question, what am I doing wrong, or are there any tips for me?
Am I really the only one confused here?

Thanks for helpful answers in advance.

Mic

  • Link to post
    Share on other sites
    Posted · About my agony of managing profile settings

    "Am I really the only one confused here?"

     

    No you are not.

    My personal fix was to not bother with Material Settings.  I'm just a hobby guy so for me, it's overly complicated.

     

    I have one Settings Profile for PLA and a second for PETG.  The only differences between the two are print speed, temperatures, and cooling.  When I start Cura, the first thing I do is check that ALL settings are visible.   Then I go over each and every setting, for every model, since geometry plays a big part in my slicing settings and every model is different.

    It's what works for me.

    And then I get sidetracked and forget to move the Zseam.  Such is life.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...