Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Will Not 'Print All At Once'

So I think your model is faulty - it looks like you have at least 4 different models overlapping.  You want to (ideally) fix that in your CAD software (which should even allow this kind of thing).

 

1) What CAD software are you using?  Is this your model or did you just download it from someone else?

 

2) There are lots of model repair services that are free.  

 

netfabb free repair service is here (you have to create a free account first):
https://service.netfabb.com/login.php

 

Here's another service - drag and drop mesh repair service:
https://3d-print.jomatik.de/en/index.php

 

Regarding "All at once".  That's when you have multiple STL files - like if you are printing little frogs and you want to print 10 of them but in "one at a time" mode.  It will completely print each frog before starting the next.  This avoids stringing between the parts and also allows you to remove some of the models mid-print.

  • Link to post
    Share on other sites
    Posted · Will Not 'Print All At Once'

    You could post the STL so we can see it.  You can also right click and see if there are "ungroup" or similar options.  STL files allow sub-meshes.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...