Jump to content
Ultimaker Community of 3D Printing Experts

Upgraded from 4.8 to 4.9 printer now prints @ 110 to 120% size


Recommended Posts

Posted · Upgraded from 4.8 to 4.9 printer now prints @ 110 to 120% size

I sliced several files the past few day's on 4.8 Cura, and ended up with accurate prints. Today I sliced in the 4.9 update - dimensions in Cura were correct per model size so the model I drafted in Fusion was not inaccurate - Yet when I generate the gcode and print the model comes out being 10 to 20% larger then the original. Deleted and reloaded my 3rd party printer settings deleting original configuration setting to try that but same problem. Never experienced this issue before?  

 

JG Aurora A5 (original)

  • Link to post
    Share on other sites
    Posted · Upgraded from 4.8 to 4.9 printer now prints @ 110 to 120% size

    my print size is OK. use the JG Aurora A5 community firmware. But the Brim width is set to 150% (thin like a needle). and all flowrates to 140% to get a proper result. and please tell the community that the initial layer height must be, leveling distance + initial layer height = layerheight. its simply wrong that increasing this value increases adhäsion to the bed. when u choose initial layer height of  i.e. 0.25  your true value is 0.25 +0.2 leveling distance. if u increase that 0.4 u`ll get only maggots on the bed.the extruder is hovering 0.6mm over the bed. better reduce to 0.1 for better adhäsion.

     

    JG Aurora A5  printing duration approx. 3000h

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 4 replies
    ×
    ×
    • Create New...