Jump to content
Ultimaker Community of 3D Printing Experts

Strange slicing result


Recommended Posts

Posted · Strange slicing result

Hi guys,

 

Why this g-code lines are attached between the gap? It seems Cura want to fill that gap which I want to keep intentionally.

 

My settings:

Fill Gap Between Walls: Nowhere

 

The project file is attached. 

 

image.png.9702e62d84cfea43ba0e01eeca97c822.pngimage.png.01fe4f4c2447ed1fc20cfd5153072da0.png

SS_framebody1t.3mf

  • Link to post
    Share on other sites

    Posted · Strange slicing result

    It's a narrow gap and your Horizontal Expansion is .26.  So .26 is added to both parts and the gap closes.  It would work if you moved the two parts farther apart.  I would suggest a brim as well.  The small footprint of SplitBoard1t.stl will likely fail without a wider base.  If you set the Brim Distance to .1 it will come off easier.

  • Link to post
    Share on other sites

    Posted · Strange slicing result

    Thanks GregValiant for your suggestion. 

    It's designed to print the SplitBoard to the main object to keep them temporary bonded but easy to be removed later. 

    The original object and SplitBoard have about 300mm height. If they are printed separately, it's hard to keep the thin wall SplitBoard precisely printed. 

     

  • Link to post
    Share on other sites

    Posted · Strange slicing result

    This is with a support blocker configured to "Print as Part" and the SplitBoard is moved away a tad.   The Horizontal Expansion is at .26.

     

    Untitled.thumb.png.fa78694edeb9e2bf70cbd6e1d5d66ce9.png

     

    Untitled1.thumb.png.ba651347b38c5be9d866a3178bdedfe5.png

     

    The block forms a bridge between the parts.

     

     

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...