Jump to content
Ultimaker Community of 3D Printing Experts

Smoothing and gluing PETG ???


Recommended Posts

Posted · Smoothing and gluing PETG ???

When you print with PLA you can smooth your printed object with ACETONE and TOO you can use ACETONE for gluing PLA parts together.

Anyone know of some 'stuff' to use for same purposes when printing with PETG ?

  • Link to post
    Share on other sites

    Posted · Smoothing and gluing PETG ???

    You can use dichloromethane, for both PLA and PET, and probably for ABS too. For PLA, this works much better than acetone, because acetone only works on the additives in the PLA, not on the pure PLA itself.

     

    Chloroforme should work too, but in most countries this requires special permissions from the authorities.

     

    Some time ago, I did a whole thread on this, with lots of photos of the results. Search for "PLA and PET smoothing with dichloromethane" (or something similar, I don't remember the exact wording).

     

    Just one photo here, a PET model smoothed and not-smoothed:

     

    matrx_adapters_13.thumb.png.e9bd9aa7ddeae3c5fca5fa2a18422740.png

     

  • Link to post
    Share on other sites

    Posted · Smoothing and gluing PETG ???

    I mostly is concerned how to GLUE PETG part together ...

     

    I wonder if I can get dichloromethane here in Denmark without special licence 😞

     

    But thx anyway !

     

  • Link to post
    Share on other sites

    Posted · Smoothing and gluing PETG ???

    Yes, you can glue PET parts with dichloromethane, on the condition that they are touching each other. Dichloromethane dissolves the outer layers and makes them bond. But since it is a very thin liquid, it has no "filler" properties, contrary to epoxy glues. So the parts have to mate almost perfectly. I mate them first, and then let dichloromethane drip and seep inbetween both surfaces, using a brush. Bonding strength is comparable to contact glues: not very strong, by far not like composites, but in most cases good enough. Smoothing/bonding also helps to seal tiny holes and makes it water-tight.

     

    Concerning licenses: in Belgium it can be bought without special license, contrary to chloroforme. At least for companies and universities, I am not sure about personal buying. Ask a chemical company.

     

    Use it outside, or in very well ventilated rooms with fume extraction (I have a fume extraction cabinet in my lab). It is not healthy. And wear eye-protection: it whitens the skin just like acetone, so we don't want it in our eyes.

     

    This part is smoothed and bonded with dichloromethane. You see how both colors blend around the bonding surface. This is PLA, but for PET it works the same, I just don't have photos of it.

     

    bond02.thumb.png.28f3db47536b10669377e4ac0629ae36.png

     

    bond07.thumb.png.65e0cc768f92e72ca44bb9a4c610538d.png

     

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...