Jump to content
Ultimaker Community of 3D Printing Experts

Why is PETG opted out on UM printers?

Recommended Posts

Posted · Why is PETG opted out on UM printers?



Why have Ultimaker decided not to support PETG?


It is a very commonly used material and Ultimaker supports a lot of materials, but not PETG. So I am curious as to what the reasoning is behind opting PETG out.



  • Link to post
    Share on other sites

    Posted · Why is PETG opted out on UM printers?

    Because there are no profiles for it. Making a set of profiles for an Ultimaker printer is a lot of work, requiring a lot of test prints for all combinations of printers, nozzles/printcores, "intents" and qualities. Until very recently there was no Ultimaker-branded PETG, so no single "PETG" to test with (and no incentive to spend money on the profiles, because it would not result in sales of Ultimaker-branded materials, I guess).


    The UM S5 and S3 support PETG now, and I think I saw on github that the UM 3 will receive profiles for it too in the next version of Cura. I am not sure about the UM2 family.

  • Link to post
    Share on other sites

    Posted · Why is PETG opted out on UM printers?

    That's not a reasoning behind opting PETG out, it's the effect of having opted PETG out.


    I have the S5 with latest firmware and it does not offer PETG. I checked it before posting my question. 

  • Link to post
    Share on other sites

    Posted · Why is PETG opted out on UM printers?

    That is perhaps a misunderstanding.  An up-to-date Cura is required to use PETG.

    PETG support has been available since Cura 4.8, currently 4.9.1. If you select PETG in a current Cura, its profile is transmitted to the printer with the print job.

    The printer firmware itself supports everything and nothing, so to speak.

    Many greetings

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 8 replies
    • Create New...