Jump to content

Benchy Qualitätsprobleme


SireneKatze5872

Recommended Posts

Posted · Benchy Qualitätsprobleme

Hallo zusammen,

 

vor einer Woche haben wir uns auf Arbeit einen Ultimaker S5 mit AirStation gekauft.  Mit den default Einstellungen hat er fast perfekt ein Kalibration Cube gedruckt. 

61902bf8-c945-4b04-bbf3-d20d709a1658.thumb.jpg.5ffd92eb25f1b9d1db25d3da72993672.jpg41de2c1e-2e0e-4160-8c68-966219fa8853.thumb.jpg.8018e5383737e8f1dfcbb4d3a204bad9.jpg

 

Lediglich "Ghosting" ist ein kleines Problem. Es liegt vermutlich an dem Tisch. Dieser wackelt schon stark während des Druckvorganges. Deswegen habe ich die Geschwindkeit auf 22,5mm/s für die Außenwand gestellt. Dort sieht man nur noch minimal das Ghosting.  Als nächstes habe ich ein Benchy gedruckt. Der Druck hat natürlich 7h gebraucht bis er fertig war. 

 

1b817301-7dcd-471e-922f-cda529dc324e.thumb.jpg.216c0e4bb0b3f129780b1dbb54c6546f.jpgb66da772-9682-4541-a785-978f399b73ce.thumb.jpg.36028e50be596f194c65e8f163818a4c.jpga369d8a9-7665-4e8b-9240-3c9c0f152c00.thumb.jpg.18cc012d4725a252e31db52723004642.jpg

 

Einige Fehler konnte ich schon selber beseitigen. Ich habe schon die Rectration Distance hochgestellt und weitere Werte verändert. Mir scheint es als ob er zu viel Filament benutzt. Dies ist vielleicht auch das Problem wieso an der Seite vom Benchy die Textur rau ist und nicht glatt. Folgende Einstellungen benutzte ich derzeit:

speed.thumb.PNG.b5761eb210ef0c5f88db795efec8e688.PNGquality.thumb.PNG.770a384b7601952a74c0d7b869651a46.PNGwalls.thumb.PNG.44603e0c29367bd27a970fe15dbfe3bf.PNGmaterial.PNG.34d7f9c772f786ca9e369c8c997b81c0.PNG

 

Habt Ihr vielleicht noch ein paar Ideen welche Werte ich verändern kann damit die Textur vom Benchy besser wird und die Übergange besser gedruckt werden? Vielen Dank im Vor raus. 

1b817301-7dcd-471e-922f-cda529dc324e.jpg

b66da772-9682-4541-a785-978f399b73ce.jpg

a369d8a9-7665-4e8b-9240-3c9c0f152c00.jpg

speed.PNG

quality.PNG

walls.PNG

material.PNG

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...