Jump to content
Ultimaker Community of 3D Printing Experts

Filament Recycler


Recommended Posts

Posted · Filament Recycler

The company I work for recently bought about 20 printers, all UMS5 Pros I believe. We have been going through a lot of material and wasting some. I feel bad throwing away bad prints or the ends of spools. I have started looking at recycling or re extruding filament to print with again. Does anyone have any experience with this? I have looked at the Filabot but that is very expensive. The ReDeTec ProtoCycler seems to be a more reasonable priced machine. Do you recommend a different machine?

 

How does the filament print after being re extruded? I know you can not mix materials. I mainly print with PETG but I do not know what the other people use. I would guess PLA or ABS. How long do these machines last? In order to justify it we would have to have the machine pay it self off over 4 years or less. With the ProtoCycler that is $73 a month or 1.5 spools (750 grams, $50 a spool) a month we would need to make. This seems reasonable with 20 printers making waste. 

 

Is there a company in the US that takes 3-D printer filament to re extrude or recycle? Does anyone pay for it? Just looking for ways to not be so wasteful with all the printer we are doing.

  • Link to post
    Share on other sites

    Posted · Filament Recycler

    I like to save the remnants of the end of the spool filament for hot and cold pulls.

     

    You can google for places that recycle other parts of waste. It will depend on your locality and what you would consider appropriate expense for shipping if need be. We have one here in NYC...or had...I am not sure after the pandemic....

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...