Jump to content
Ultimaker Community of 3D Printing Experts

Cloud / Digital Factory Usage Model Alternative?


Recommended Posts

Posted (edited) · Cloud / Digital Factory Usage Model Alternative?

I'm thinking about finally retiring my highly modified UMO that I purchased in 2012, but I don't believe in using "the cloud" for controlling my 3D printing (or much of anything else, really). Is the only current Ultimaker product line alternative a tethered computer via USB or perhaps a memory stick (no better than my 9 year-old UMO)? It's a shame to waste Ethernet and wifi hardware on a cloud-only solution! This may be an Ultimaker deal breaker for me.

Edited by calinb
  • Link to post
    Share on other sites

    Posted · Cloud / Digital Factory Usage Model Alternative?

    The UM product line is not cloud only, that's wrong. Every UM printer can print directly from SD card or USB stick. Nearly every printer which is network enabled (ethernet, wifi) can also be used to directly send the print job from Cura to the printer - locally, no cloud. An exception is the UM2+Connect, this printer can only be used via the Digital Factory (Cloud) or USB stick. But with every other printer it is up to you if you want to use the printer locally, fully isolated if you want or if you want to use the cloud. Both is possible and if you want, also both together. So if you connect the printer to the cloud, you can decide in Cura if you want to print directly, print via cloud or save the gcode to USB. 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...