Jump to content
Ultimaker Community of 3D Printing Experts

Ultimaker TPU95A


SandervG
 Share

Recommended Posts

Posted · Ultimaker TPU95A

Ultimaker TPU95A is a flexible material and chemical resistant. Printing flexible material is not always easy, but with TPU95A you should have a seamless 3D printing experience. Excellent from printing handles, bumpers or outer shells to reduce damage from wear. How flexible your print is can be influenced via the amount of walls and the type of infill used. Curious? Ask us below what you are trying to achieve! 

 

Have you used TPU95A before? Let us know what you thought below, it might be helpful to new customers considering to use TPU95A. 
 

  • Link to post
    Share on other sites

    Posted (edited) · Ultimaker TPU95A

    We use this quite a lot, both in Blue and Red.

     

    Not very often do we print pure TPU parts, but we infuse it with PC and PET-G, here are a few pics:

     

    PET-G with TPU:

     

    image.thumb.png.c25dfc8e772cae93284231d55651ae31.png

     

     

    PC and TPU:  (top item PEG-G + TPU bottom part PC + TPU)

     

    We have found that it bounds slightly better with PC ( although PC is limited to AA0.8mm nozzle...) 

     

    image.thumb.png.e8034d8d347f3cfbe01694a23f896e04.png

    Edited by Carbon
    • Like 1
    Link to post
    Share on other sites

    Posted · Ultimaker TPU95A

    Hi @Carbon, thank you for your response! I'm very happy to see you happily and productively using TPU. Would you mind elaborating what the function is of TPU in your shown examples? Does it protect against impact or wear? Did you need to make a few versions to learn the proper density coming from the infill pattern? 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...