Jump to content
Sign in to follow this  
markusa380

Ultimaker Original doesn't heat up...

Recommended Posts

Posted · Ultimaker Original doesn't heat up...

Hello guys out there!

I am having a problem with my newly assembled Ultimaker Original:

It just doesn't heat up.

I am running it over USB and as I have read, the fan on the bottom should turn on then. It also doesn't, i can have the switch turned on or off or the power supply cable plugged in or not. Nothing seems to work. Did I make a mistake?

Greetings,

MarkusA380

 

Share this post


Link to post
Share on other sites
Posted · Ultimaker Original doesn't heat up...

Sounds like you have no power running to the printer at all, do you have an ulticontroller? If so, can you use it to eg. move some axis? The ulticontroller can run on usb power alone, while the rest of the printer needs the power supply...

 

Share this post


Link to post
Share on other sites
Posted · Ultimaker Original doesn't heat up...

Also, do I need to plug the power in without an UltiController? If so, the light on the power supply unit goes off if I turn the switch on.

Share this post


Link to post
Share on other sites
Posted · Ultimaker Original doesn't heat up...

the light on the power supply unit goes off if I turn the switch on.

 

That's not good.

First of all be aware that the power brick that comes with the UM1 has a safety feature that once it is shorted out you need to unplug from the wall for it to come back on.

It sounds like something is wrong in a big way in your electronics - maybe a short somewhere.

1) Are you good with electronics?

2) Do you have a voltmeter? If not get one - it's time to learn something new. I will try to guide you. Or if you don't want to learn about electronics consider sending the PCB back to ultimaker but first contact them here: support.ultimaker.com

The circuit diagram can be found here:

The circuit diagram, and board layout are here:

http://reprap.org/wiki/Ultimaker%27s_v1.5.7_PCB

There is a zip file at the top. It contains the "brd" file which is the layout. Also the "sch" file which is the schematic.

Both files can be opened by eagle software which is free:

http://www.cadsoftusa.com/download-eagle/

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 181 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!