HELP Flashforge Adventurer 4 with Cura

[Ya_Boi_JC 0]

I am trying to setup my Adventurer 4 with Cura and I thought I got it working, but when I tried printing a calibration cube the printer started struggling and so I stopped it. In the picture I attached, the one on the left is with Flashprint and the one on the right is with Cura.

[GregValiant 1,346]

Post that FlashForge gcode file and the one from Cura.  A comparison might reveal why the Cura print is under-extruded.

There have been other posts regarding FlashForge printers and Cura and I don't know if it's been figured out yet or if it's even possible.  Some companies just want you to use their slicer.

What diameter filament does the FlashForge use?

[Ya_Boi_JC 0]

On 12/5/2021 at 5:23 PM, GregValiant said:

Post that FlashForge gcode file and the one from Cura.  A comparison might reveal why the Cura print is under-extruded.

There have been other posts regarding FlashForge printers and Cura and I don't know if it's been figured out yet or if it's even possible.  Some companies just want you to use their slicer.

What diameter filament does the FlashForge use?

1.75

[GregValiant 1,346]

I have written my own tools that I use in AutoCad and Excel and they do a fine job of deciphering and comparing gcode files.  Without the files I really can't help.