Jump to content

Umbau ultimaker 2 auf Biqu 2o wassergekühlt


Robsi

Recommended Posts

Posted · Umbau ultimaker 2 auf Biqu 2o wassergekühlt

Hi,bin neu hier und möchte mich, euch auf diesem Wege begrüßen. Ich habe mir vor kurzem erst einen Ultimaker 2 zugelegt und hatte von Anfang an Probleme ( Vorgänger hatte schon etwas selber rumgebastelt) mit dem Filament Einzug, um das ganze zu umgehen möchte ich jetzt mit der Zeit gehen und ein Hotend von Biqu Einbauen und zwar das Wassergekühlte mit Direkteinzug. Dasmüsste von der Größe her passen. Habe mir vorgestellt das ich die Marlin Firmware aufspiele um die neuen Parameter neu zu installieren. Ich vermute mal das ich für den Temperatursensor auch noch was brauche das die Teile sich verstehen.  Jetzt die große Frage, hst jemand schon einen ähnlichen Umbau gemacht und kann mich etwas unterstützen? 

  • Link to post
    Share on other sites

    Posted · Umbau ultimaker 2 auf Biqu 2o wassergekühlt

    Hallo,

     

    Ich glaub das macht deinen UM2 nicht besser

     

    Der UM2 wurde als Bowden Drucker konstruiert

    Schön leichter Druckkopf

     

    Wenst du jetzt dort einen schweren Druckopf mit Directdrive (+ Wasserkühlung) montierst wird das andere größere Probleme mit sich bringen

    Dafür sind einfach die Dünen Wellen + Bewegungsapparat nicht ausgelegt

     

    Ich selber habe meinen UM2 auf Dual + Selbst Bau Wakü Kühler umgebaut und merke einfach das zu viel am Druckkopf zerrt

     

    Die Elektronik ist eine ganz andere Baustelle

    Wie willst du die Wakü ansteuern?

    Der Druckkopf scheint ja mit einen USB kabel (schaut jedenfalls so aus) angesteckt zu werden, wie um Gottes willen willst du das mit den Board verbinden, da must ja schon den neuen Druckkopf zerlegen umbauen.

     

    Also ich würde das nicht machen

    Ich hab hier und da mal umbauten mit Directdrive am UM2 gesehen, das was ich am häufigsten gesehen habe ist aber mit Welle (aus der Community), da der Feeder Motor einfach zu schwer für den Druckkopf ist

     

    Gruß

  • Link to post
    Share on other sites

    Posted · Umbau ultimaker 2 auf Biqu 2o wassergekühlt

    Servus, teile sind schon soweit verbaut, der Biqu ist recht kompakt gebaut und etwas schwerer als der alte Kopf, würde sagen so das doppelte, vom Kabel her war das unspektakulär, es ist kein USB Anschluss sondern ein 5 poliger Anschluß mit Gegenstück passend zum Bord. Temperaturfühler ist der Selbe nur dicker. Muss jetzt nur die Marlin Firmware installieren und in Gang bekommen. Mfg 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...