Jump to content
Ultimaker Community of 3D Printing Experts

UM2 - how to save settings


woofy
 Share

Recommended Posts

Posted · UM2 - how to save settings

I need to print at 230C but the default is 210C (I'm sure it used to be 220C).

How do I set it to 230C, because I keep forgetting to increase it and 0.1, 210C at 40mm/Sec causes under extrusion.

 

  • Link to post
    Share on other sites

    Posted · UM2 - how to save settings

    Small suggestion...

     

    Will we one day, if possible to save multiple profiles?

     

    There could have location as:

     

    Material-> settings-> customize-> temperature-> Choose memory

     

    Profile 1 <-

    profile 2

    profile 3

     

    Once in a profile could imagine you can edit or delete it.

     

  • Link to post
    Share on other sites

    Posted · UM2 - how to save settings

    Woofy is correct, you can already do that. Can't remember off the top of my head how to do it but I think it should be fairly obvious once you're in the menus.

     

  • Link to post
    Share on other sites

    Posted · UM2 - how to save settings

    Yes, under that menu you can select an entry and edit the various parameters and save it, it then appears as "Custom 1", "Custom 2", "Custom 3", etc each time you save. Unfortunately you can't seem to edit the names, delete ones you don't want, or re-edit an existing one in place, but pretty sure a factory reset removes them (need to double check, I reset the other day).

     

  • Link to post
    Share on other sites

    Posted · UM2 - how to save settings

    View like this ...

     

    I think the case where several PLA profiles and multiple profiles on ABS ...

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 11 replies
    ×
    ×
    • Create New...