Jump to content

cura 5.0 merging parts together


vertigon

Recommended Posts

Posted · cura 5.0 merging parts together

so if you can see the picture you can see what is supposed to be a planetary gear bearing. the inside stars rotate around the centermost hub, but for some reason cura is deliberately merging what is 2 separate parts purely based on their proximity: the hub spokes cannot rotate if they are part of the outer ring. on previous versions there was a setting to 'fill gaps' or something that i cant find anymore. i could tolerate it on the first layer but its doing it on MOST layers, almost all. help?

curaFailed.png

  • Link to post
    Share on other sites

    Posted · cura 5.0 merging parts together

    This model just came up with a brim problem.  With the model loaded and Cura set up to slice use the "File | Save Project" command and post the 3mf project file here.  I sliced this with 5.0 and it was fine so it must be a setting.

  • Link to post
    Share on other sites

    Posted (edited) · cura 5.0 merging parts together

     

    Slicing Tolerance must be set to Middle

    image.png.525b9389b11a74984483551c8830d861.png

     

    And reduce the Horizontal expansion -0.3 is too much 

    image.png.9a78bdb992a49af3756405eec9daa2c2.png

     

    image.thumb.png.257b3143c949328d4599f3dbe6ef7f3f.png

    Edited by Cuq
    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...