Jump to content

problemas con la generacion de soportes


seress

Recommended Posts

Posted · problemas con la generacion de soportes

manejo una impresora hellbot magna 1 v2 en la versión de cura 5.0.0 tiene terribles problemas a la generación de soportes, los crea en el aire, ciertas zonas no los genera, cubre la mitad del modelo la otra mitad no, y muchos mas

14f6246f-8e1a-4e77-b77a-af42215511e9.jpg

21bf88d8-d361-4b60-8c00-4e69ffb04ee9.jpg

d1ac7c68-41cf-4411-a226-327f417ae51b.jpg

  • Link to post
    Share on other sites

    Posted · problemas con la generacion de soportes
    si pero, no se entienden que hay una falla muy grande en su programa, no se si entiendes la gravedad de esto.
    ----------------------------------------------
    yes but, they don't understand that there is a very big flaw in their program, I don't know if you understand the seriousness of this.
  • Link to post
    Share on other sites

    Posted · problemas con la generacion de soportes

    Su modelo es complicado. Parece que está utilizando soporte de árbol, que es más complicado y con errores. No creo que haya respuestas fáciles, excepto "prueba con un cura más antiguo" e "intenta hacer soporte usando mesh mixer" y "usa soporte normal". Puede obtener mejores respuestas si publica en la parte en inglés del foro, ya que más personas leerán su publicación.

  • Link to post
    Share on other sites

    Posted · problemas con la generacion de soportes

    Este modelo ya lo impri anterior mente y me genero bien los soportes, en la versión 5.0.0 aparecieron problemas con la generación de soporte, pero no solo en tipo árbol también es con los soportes normales, y este problema se me presenta en varias maquinas y varios colegas me comentan que les pasa lo mismo, soportes mal ubicados, soportes que se generan en el aire, partes que no se cubre cuando están marcadas para que se cubran.

    Y este problema es hasta con las piezas mas simples.

    le dejo un ejemplo, de algo mas simple, es un molde para macetas, tiene una pieza que necesita soportes ya que es paralela a la placa de impresión, en la ultima foto vera como genera soportes que empiezan en el aire y en el centro no  cubre solo cubre los bordes, y con soporte tipo normal pasa lo mismo. solo cubre los bordes no el centro.

    86e258ce-ae43-4b08-aa2a-f28f363a0ea1.jpg

    948d6768-0b43-45f7-b7a5-9f0ec8064778.jpg

    6133fbb3-4f8c-4bab-b9af-1b430f0a1b1a.jpg

    734a7be8-8ca0-4ff7-a1d1-1f564b4cf2e5.jpg

    cfeed478-9b2f-401d-8444-5d6d3ecc08dd.jpg

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...