Jump to content

Selecting material in S5 Material Station from Cura


Recommended Posts

Posted · Selecting material in S5 Material Station from Cura

We've just installed a new Material Station for our Ultimaker S5. While we can see all 6 reels loaded on the printer itself and when selecting "Material Station" from our web interface, these choices aren't available from Cura. At the moment Nozzle 1 is showing as empty — despite having filament loaded and ready to go — and Nozzle 2 only shows one of the 3 reels. This is also reflected when looking at the print queue from the web interface.


How do we go about selecting different materials for a specific nozzle so we can specify which filament — or pairs of filaments — we use for a specific print?

  • Link to post
    Share on other sites

    Posted · Selecting material in S5 Material Station from Cura

    Some materials are not compatible with some print core types. Cura only shows you the selections possible with the current print cores installed. Maybe that narrows it in your case.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
      • Ultimaker Cura 5.6 stable released
        Cura now supports Method series printers!
        A year after the merger of Ultimaker and MakerBotQQ, we have unlocked the ability for users of our Method series printers to slice files using UltiMaker Cura. As of this release, users can find profiles for our Method and Method XL printers, as well as material profiles for ABS-R, ABS-CF, and RapidRinse. Meaning it’s now possible to use either Cura or the existing cloud-slicing software CloudPrint when printing with these printers or materials
        • 9 replies
    • Create New...