Jump to content

Cura 5.2.1 is filling out empty space with infill


TheSchiffbauer
Go to solution Solved by GregValiant,

Recommended Posts

Posted (edited) · Cura 5.2.1 is filling out empty space with infill

Hey guys, 

 

I've tried to print a lid for a box. But Cura is always filling out the empty space under the lid with infill. In Addition Cura sets a bottom layer. 

 

image.thumb.png.ab9f93a7c583c6b02b89212b1ce8c018.png

Figure 1: Preview of the lid at layer 23

 

image.thumb.png.b4260c719ba525d9ea6a67a082712dc3.png

Figure 2: .stl-file in Prepare

 


All the boxes under Mesh-fixing are not enabled (I've read these tipps in another forum). 

Furthermore the .stl-file has no errors according to the mesh-fixer Add-on in Cura and Meshmixer.

 

I hope that you can help me. 

The .stl-file and the .3mf file are attached.

 

Best regards

 

Maik

Norbert Deckel.stl CCR10_Norbert Deckel.3mf

Edited by TheSchiffbauer
Forgott to upload the pictures
  • Link to post
    Share on other sites

    • Solution
    Posted (edited) · Cura 5.2.1 is filling out empty space with infill

    Go down to the Experimental settings and turn off "Make Overhangs Printable".

    If it isn't visible then select "Custom" settings and then, to the right of the Settings Search box is an icon with three lines on it.  Click on it and set the visibility to "All".

    Edited by GregValiant
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...