Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  
Dim3nsioneer

Cura issue policies

Recommended Posts

Maybe some of you have seen it as well on Github. Quite a lot of open Cura issues have been closed today by Nallath. There also seem to be new / modified issue policies since today / yesterday.

As Cura gets a new GUI, I can understand that issues which will be solved by implementing this new GUI are closed.

For some of the closed issues, the relationship to the GUI is obvious, for others it is not (at least not for me).

Thus, I would like to express my slight concern about this 'new' way to deal with issues submitted by the community. I hope, that Ultimaker is following the up to present path of improving the software together with the community.

If this is the case, the Cura road map, which is mentioned in the issue policies, should maybe be published. If it is already, Daid and Nallath, please provide a link.

I think everybody is aware who has written this excellent software called Cura (for the few ones who don't: Thanks Daid!). However it might not be completely unfair to say that this community had its share in the success of Cura. And I guess many of us, including me, would be glad to help improving it further. Please let us. Thanks!

 

Share this post


Link to post
Share on other sites

I've made these policies together with Daid, due to the large number (eg; 200+) issues on the github. Most of these issues were vague, already fixed or will be resolved by the new GUI.

I don't quite see what there is to be concerned about. Instead of random answers to issues, there are clearer rules on what we would like to see in issues and when / how they will be closed.

The community is free to implement or recomend new features, but simply put; "Ideas are cheap". I'm not working fulltime on Cura and neither is Daid. So we have to select which suggestions to implement.

 

Share this post


Link to post
Share on other sites

The roadmap is in my inbox. It's private for a couple of good reasons. One of them being that you cannot hold me to it. (Select-able support material has been on it for 6 months already, and has been pushed back a few times)

The other is time. Some features are 3 words on the roadmap, but require a lot of words and pictures to explain. I pretty much could fill a full time job by just writing out the roadmap in a way that people outside of Ultimaker would understand it.

Nallath, my trusted minion, and colleague, is working trough the whole issue list, closing just about anything to clean it up. If you think something is closed but should not be closed, feel free to open it again and state why.

There where 300+ open issues. So this is the quickest way to clean them up.

How we are planning to deal with incoming issues on the issue tracker is stated at:

https://github.com/daid/Cura/wiki/Issue-policies

We're currently working on totally re-doing some major parts of the code. That's why the issue list is cleaned up. This to incorporate all the things we've learned the last 2 years. The code base was still based on the early stuff I made when I started Cura. Due to the added features it started to grow into a mess.

This new GUI, with new underlying code, will have much better support for different machines and different user requirements. We have some great ideas for this that I do not want to spoil yet.

The new code can be followed on the PinkUnicorn branch. It's currently nowhere near functional, but if you dive into the code you can see things we are doing with scenes, machines, views and tools to structure everything better.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Introducing Ultimaker Cura 3.6 | Beta
      Ultimaker Cura 3.6 | Beta is available. It comes with new features, bug fixes, and UX improvements. We would really like to have your feedback on it to make our stable release as good as it can be. As always, you can download the beta for free from our website, for Windows, MacOS, and Linux.
        • Like
      • 70 replies
    • Print Core CC | Red for Ruby
      Q: For some users, abrasive materials may be a new subject matter. Can you explain what it is that makes a material abrasive when you are not sure which print core to use?
      A: Materials which are hard in a solid piece (like metals, ceramics and carbon fibers) will generally also wear down the nozzle. In general one should assume...
        • Like
      • 21 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!