Wall Order From Inside to Outside

[hstg 0]

Hi,

 

I do have a small overhang. To print it, i want cura to print the walls from inside to outside. Usually this works fine with this kind of overhang. I thought I did all settings right, but it does print the second wall from outside first. I've used the following settings:

 

Does anyone of you have an idea what to change? I've uploaded the project file if you wanna try before post an idea.

 

Thank you!

AI3MSPRO_SwitchHalter.3mf

[Slashee_the_Cow 415]

Praise <insert joking nickname for appropriate religious figure here>, someone who knows to post the project file!

 

Go to Experimental and turn off Group Outer Walls