Jump to content

Slicer is not slicing things correctly and is adding in extra things

KTec

By KTec
in UltiMaker 3D printers

 Share
Go to solution Solved by ahoeben,

Recommended Posts

KTec

KTec 1

Posted
Posted · Slicer is not slicing things correctly and is adding in extra things

The Ultimaker Slicer is adding in odd connections and then prints the connections too, it also keeps on cutting of the top of the files. I just updated to the newest version of the Slicer and it seemed to fix the issue, however, it just came back. So, I fully uninstalled the slicer and reinstalled it, however it still had the same issue. The slicer version is 5.6.0, and the Ultimaker S5 printer firmware version is 8.3.0. I have attached some pictures. What can I do to fix this issue?

Screenshot2024-02-15at11_29_33AM.thumb.png.9cd27379d0e282a2af98c54ab61a647f.png

Prepare

Screenshot2024-02-15at11_29_50AM.thumb.png.afd686bb3b10a1362643c4084f104f51.png

Preview

Screenshot2024-02-15at11_30_11AM.thumb.png.d77e29d0b19530d1c5c43d5984378b37.png

Prepare

Screenshot2024-02-15at11_30_18AM.thumb.png.a0f78f86b8ecc422a79be81752ec144b.png

Prepare

Screenshot2024-02-15at11_29_56AM.thumb.png.00d695ef966313c7cf1b8d8b38658b9b.png

Preview

Screenshot2024-02-15at11_30_02AM.thumb.png.0a6981b84ce40ce39d5e6da9ebe04d81.png

Preview

Screenshot2024-02-15at11_30_18AM.thumb.png.a0f78f86b8ecc422a79be81752ec144b.png

Prepare

    • Link to post
    Share on other sites
    • Solution
    ahoeben

    ahoeben 1,981

    Posted
    • Solution
    Posted · Slicer is not slicing things correctly and is adding in extra things

    Those screenshots (however many there are) don't give us a lot to go on (especially since the forum scales them down), but I can take a guess and say "turn off Spiralize Outer Contour".

    • Link to post
    Share on other sites
    KTec

    KTec 1

    Posted
    • Author
    Posted · Slicer is not slicing things correctly and is adding in extra things

    Thank you very much. I had forgotten to check the custom settings.

     

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Followers 1
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉

        UltiMaker Cura 5.8 Stable released 🎉

        MariMakes posted a topic in UltiMaker Cura,

        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 3 replies
        MariMakes

        Picked By

        MariMakes,
      • Introducing the UltiMaker Factor 4

        Introducing the UltiMaker Factor 4

        ArunC posted a topic in UltiMaker 3D printers,

        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...