Cura 5.6.0 no longer sending Post Processing Scripts

[TikiTD 0]

I'm trying to run a Temp Tower on my CR10-v3 and for some reason Cura is not longer sending the post processing script information.  It will print the entire part at whatever temp I have set in Print Settings and will not adjust based on the settings in the script.  It worked fine a few days ago, and now nothing.  I have changed nothing on my printer or on my computer, or within Cura.

 

Any idea why it would not be using the script data?

[Slashee_the_Cow 429]

If you could provide the Cura project file (.3mf, open it up in Cura, get it ready to print, then go to File > Save Project) and the script you're using (if it's not one included in Cura you'll have to put it in a zip file because you can't upload .py files to the forum) we can have a look (what you've said isn't much to go by).

 

Also worth mentioning: if you want to do temp towers, there's an awesome plugin called "AutoTowers Generator". Just click "Marketplace" at the top right and search for it:

It'll add a bunch of preset towers in Extensions > Auto Towers or you can make custom ones if you install a free program called OpenSCAD. No messing around with post-processing scripts, just pick a tower and save the gcode!