Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  
qwarks

Smaller nozzle?

Recommended Posts

Hi Everyone.

In my eternal quest for finer and higher quality print, i stumbled upon someone talking about 0,2mm and 0,15mm nozzle sizes, and that got me thinking.. Has any of you tried a finer nozzle, and if you have, where du you get one?

Another thing i wanted to share with you, is that, i have had a few things printed at my local 3D printer guy BU (Before Ultimaker), at a very high cost, because of the very expensive machines he own and the very expensive filament he uses.

I told him that i have bought a "reprap" printer and he kind of padded me compassionately on the shoulder with his nodding/ half smiling/patronizing expression. Now i have had my Ultimaker for about three weeks, and the prints are getting better and better.

The other day i went to show him a print that i made on the ultimaker - a print from the same file that he printed for me on hi's machines just a few month's ago. I just loved the way his expression went from patronizing to utter disbelieve!

The model i showed him, had better resolution and was much stronger than his ABS printed model... I could tell that he felt sick yo his stomach :lol: - well you should'nt kick a man who lying down, but MAN THAT WAS FUN!! :lol:

Anyway, any feedback on my question is appreciated.

Thank you.

Share this post


Link to post
Share on other sites
I've heard of people using 0.35mm but nothing smaller. There'd be lots of bowden tubes a poppin' I should imagine?

AFAIK, the UM standard nozzle is 0.35mm. you can check it by extruding some filament into mid air and measuring the string that comes out of the nozzle. (my makergear nozzle is nominal 0.5mm, but 0.56 in reality).

using a smaller nozzle works just fine, you just have to change your expectation how many mm^3/sec you can squeeze through the small hole (which involves just going slower), other than that, it's no problem.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Introducing Ultimaker Cura 3.6 | Beta
      Ultimaker Cura 3.6 | Beta is available. It comes with new features, bug fixes, and UX improvements. We would really like to have your feedback on it to make our stable release as good as it can be. As always, you can download the beta for free from our website, for Windows, MacOS, and Linux.
        • Like
      • 95 replies
    • Print Core CC | Red for Ruby
      Q: For some users, abrasive materials may be a new subject matter. Can you explain what it is that makes a material abrasive when you are not sure which print core to use?
      A: Materials which are hard in a solid piece (like metals, ceramics and carbon fibers) will generally also wear down the nozzle. In general one should assume...
        • Like
      • 30 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!