Jump to content
Sign in to follow this  
kas

Problem Printing Embossify

Recommended Posts

Posted · Problem Printing Embossify

It appears that Cura cannot print the STL output from Embossify (http://www.embossify.com/). The file loads and appears on the platform, and then Cura seems to freeze. Embossify is a service for converting 2D jpegs to 3D STLs. I'd appreciate any help or suggestion.

 

Share this post


Link to post
Share on other sites
Posted · Problem Printing Embossify

Have you tried it with Cura directly? You can just load the jgp. If you're not satisfied with the result, you may export an STL and tweak it with another software.

btw: welcome to the forum... ;)

 

Share this post


Link to post
Share on other sites
Posted · Problem Printing Embossify

Have you tried it with Cura directly? You can just load the jgp. If you're not satisfied with the result, you may export an STL and tweak it with another software.

btw: welcome to the forum... ;)

 

Heuh?

WTF... Loading a jpeg in cura? woohw.

Tought they where busy with serious things at Ultimaker ;)

But chips.. It works haha.

Something to play with this afternoon LOL.

 

Share this post


Link to post
Share on other sites
Posted · Problem Printing Embossify

Have you tried it with Cura directly? You can just load the jgp. If you're not satisfied with the result, you may export an STL and tweak it with another software.

 

Mind. Blown. Amazing feature!

 

Share this post


Link to post
Share on other sites
Posted · Problem Printing Embossify

It seems that this feature is unknown to most of us :) i discovered it a couple of weeks ago but i didn't try a print yet

 

Share this post


Link to post
Share on other sites
Posted · Problem Printing Embossify

Hi,

IMG 0924

My Logo 0.1mm layer, PLA printed with an UP Mini with RAMPS electronics;)

 

Share this post


Link to post
Share on other sites
Posted · Problem Printing Embossify

Ok... not sure how that helps kas though Fredee? Was it just to put your link to your site out there?

 

Share this post


Link to post
Share on other sites
Posted · Problem Printing Embossify

Have you tried it with Cura directly? You can just load the jgp. If you're not satisfied with the result, you may export an STL and tweak it with another software.

btw: welcome to the forum... ;)

 

Thanks a bunch; your suggestion worked like a charm :)

 

Share this post


Link to post
Share on other sites
Posted · Problem Printing Embossify

sorry, it is to show how good cura can convert jpg's into 3d printing files, nothing more;)

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!