Won't slice properly from my desktop

[Pup_Storm 0]

So while Cura works fine on my laptop whenever I try to slice from my desktop it starts trying to print from off to the bottom left corner treating that corner like it is the center. 

[Slashee_the_Cow 442]

1. On your desktop, in Cura, in the Prepare view there's the list of printers (or just one for most people). Click on that list to open it and click Manage printers at the bottom right.
2. Assuming your printer is the currently active one, just click Machine Settings to open the settings for your printer.
3. Look for the Origin at center setting. For most printers it needs to be turned off. For yours it sounds like it might need to be turned on. Either way, just turn it on if it's off (or vice versa) and see if that fixes it.