Jump to content

Recommended Posts

Posted · Problem mit Start G-Code nach CR Touch Upgrade (Ender 3 V2)

Hallo zusammen,

ich habe ein Problem mit meinem Ender 3 V2, auf dem die Professional Firmware läuft.

Nach dem Upgrade meines Druckers mit einem CR Touch wollte ich die notwendigen Befehle in den Start-G-Code integrieren. Mein aktueller Code sieht folgendermaßen aus:


 

; Ender 3 Custom Start G-code

G92 E0 ; Reset Extruder

M140 S60 ; Warm bed to 60C.

M190 S60 ; Wait until bed is warm so we're more accurate.

G28 ; Home all axes

G29 ; Auto Bed Level

M420 S1 ; Use mesh level upto 2 mm

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish

 

Problem:
Leider werden folgende Zeilen im Start-G-Code ignoriert:


 

M140 S60 ; Warm bed to 60C.

M190 S60 ; Wait until bed is warm so we're more accurate.

G28 ; Home all axes

G29 ; Auto Bed Level

M420 S1 ; Use mesh level upto 2 mm

 

Ich wäre sehr dankbar, wenn mir jemand bei diesem Problem weiterhelfen könnte.

Vielen Dank im Voraus für eure Unterstützung!

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.9 stable released!
        Here comes Cura 5.9 and in this stable release we have lots of material and printer profiles for UltiMaker printers, including the newly released Sketch Sprint. Additionally, scarf seams have been introduced alongside even more print settings and improvements.  Check out the rest of this article to find out the details on all of that and more
          • Like
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Heart
          • Thanks
          • Like
        • 7 replies
    ×
    ×
    • Create New...