Jump to content
Ultimaker Community of 3D Printing Experts

Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

ian

By ian,
in Coffee corner

 Share Followers 0

Recommended Posts

ian

ian 32

Posted
Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

Hi guys !

Im really delighted to announce that I will be presenting once again at Germanys largest 3D Print Technology Fair in Erfurt Germany this year.

Between the 15th and 17th of May, some of the biggest and most clever players in the 3D print revolution will be there in force.. eager to show off their latest and greatest new developments :-)

This year my Presentation is titled.

3D Printing - Widening the Spectrum of Creativity and Making Ideas Printable.

Your Imagination is the only barrier to unlimited creativity.. after that all you need is to make it printable

I am going to be going into some really good detail about how to best handle Arch models for 3d print and also.. interesting for all ultimaker users.. my development of my latest filament feeder system... films of the beast in use and discussing better methods of filament transfer and handling within a 3d printer... Iv been busy the last months ;-)

Should be exciting...

So everyone is invited and I hope to meet lots of you amazing people there !!

Ian :-)

http://www.fabcon-germany.com/en/homepage.html

 

    • Link to post
    Share on other sites
    ian

    ian 32

    Posted
    • Author
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    and this year !! 30% reduction in having my hands tightly packed between my legs... LOLLLL

    2013-05-14140448.jpg

     

    • Link to post
    Share on other sites
    duesentrieb

    duesentrieb 0

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Sounds cool. Worth a journey, I think. Which is the most interesting day? There aren´t that "many" speakers and one of them I have seen already two times... so I think one, max two days will be enough. This fair is part of the rapid tec, isn´t it?

    Anybody an idea where to find a good but affordable hotel in Erfurt? Never been there before. According to the website Ultimaker will also be represented. Will you guys be there or is it just iGo3D?

    Let´s see if I get a day or two off and we can drink a bear, Ian.

    Regards,

    Philip

     

    • Link to post
    Share on other sites
    ian

    ian 32

    Posted
    • Author
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    the fair just published the complete speakers list today.. so you can pick and choose which sounds tasty !

    http://www.fabcon-germany.com/en/speaker-program.html

    PS.. im guessing.. or hoping some of you chaps might like joining me for a beer Friday evening in Erfurt ??? :wink:

    Ian :smile:

     

    • Link to post
    Share on other sites
    woofy

    woofy 12

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Oh Ian, how I wish I could get there. Our own Daid a couple of hours before as well. But it's not going to be possible.

    I'll be in Munich in November for Electronica. Just wishing I could swap.

    Ah well!

    PS Good luck next week. :cool:

     

    • Link to post
    Share on other sites
    skint

    skint 61

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Wish I could join you for a beer or three :(

     

    • Link to post
    Share on other sites
    cez_etc

    cez_etc 0

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    PS.. im guessing.. or hoping some of you chaps might like joining me for a beer Friday evening in Erfurt ??? :wink:

    Ian :smile:

     

    Count me in! :-P

     

    • Link to post
    Share on other sites
    SandervG

    SandervG 1,378

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Anybody an idea where to find a good but affordable hotel in Erfurt? Never been there before. According to the website Ultimaker will also be represented. Will you guys be there or is it just iGo3D?

    Let´s see if I get a day or two off and we can drink a bear, Ian.

    Regards,

    Philip

     

    Don't know about the hotel, but I do know Daid will be at the show.

    For the rest it will be iGo3D.

    We would like to come but it is at the same time as Maker Faire San Francisco..

    I can 3D scan and print myself, but I am not sure how active my clone will be in Erfurt ;)

    Until bio 3D printing will make a huge leap forward I can only be at one place at the time unfortunately..

     

    • Link to post
    Share on other sites
    skint

    skint 61

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Sander, come on... i heard rumour that Ultimaker was going to sponser ALL of us forum users to a free hotel and free bar right ? :p

     

    • Link to post
    Share on other sites
    ian

    ian 32

    Posted
    • Author
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    OR... buy an Ultimaker2 and get a romantic night in Erfurt Germany with Ian FREE .... :smile: LOLLL

    wait... would that actually help sales ??

    Ian Loll :wink:

     

    • Link to post
    Share on other sites
    ulbie

    ulbie 0

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    I'll be there again and of course would like to take a beer with you lan...(I think two+ are better) ;)

    Need to find a cheap place where I can rest for the night, let's have a look!

    • Link to post
    Share on other sites
    ian

    ian 32

    Posted
    • Author
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    yipppeeeeeee !!!!

    FireworksHistory4.jpg

     

    • Link to post
    Share on other sites
    SandervG

    SandervG 1,378

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Sander, come on... i heard rumour that Ultimaker was going to sponser ALL of us forum users to a free hotel and free bar right ? :p

     

    I will probably be in the UK a couple of times this year.

    Are you planning on going to TCT / 3D Printshow?

    .. I wonder who spread that rumor :p

     

    • Link to post
    Share on other sites
    skint

    skint 61

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    @sander TCT 3D print show, whenever and where ever it is, I will make it and buy you a pint :)

     

    • Link to post
    Share on other sites
    cez_etc

    cez_etc 0

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Tomorrow!

     

    • Link to post
    Share on other sites
    teddy04

    teddy04 0

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Hey guys,

    I'm tomorrow on the fabcon all the day I hope. In the German forum I've posted my identification tag.

    I'll gave my best in English but German I can speak perfectly.

    See you

    • Link to post
    Share on other sites
    ian

    ian 32

    Posted
    • Author
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    arriving there tomorrow at 10 ! :-)

    yipppeeee

     

    • Link to post
    Share on other sites
    Daid

    Daid 298

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    arriving there tomorrow at 10 ! :smile:

    yipppeeee

     

    We missed you last night :(

     

    • Link to post
    Share on other sites
    lennart-bruggink

    lennart-bruggink 3

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    have fun!

     

    • Link to post
    Share on other sites
    sebastian

    sebastian 0

    Posted
    Posted · Germanys Biggest Dedicated 3D Print Fair FABCON is kicking off in a little more than a month :-)

    Just uploaded some pictures from yesterday at the fair:

     

    Crowded entranceStool projectHypecask/ Deltatower boothHypecask/ Deltatower boothHypecask/ Deltatower boothHypecask/ Deltatower boothWilliam Hoyle: "Fair Trade Filament – Why does it matter?"Electronic ThingsIGUSPerpetual Plastic ProjectDawandaBotspot MiniMe figuresMr. Beam - Low Cost LasercutterColorFabbNinjaFlex FilamentNinjaFlex FilamentUltimaker2 at iGo3d.com boothFilemon Schoffer - "Local manufacturing through 3D Hubs, world

     

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Followers 0
    Go to topic listing
    ×
    ×
    • Create New...