Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  
gonazar

Ultimaker 2 USB remote control while printing from SD Card

Recommended Posts

So I know Ultimaker 2 currently has unstable USB printing capability, which may or may not be fixed with future firmware updates.

However, I don't want to print via USB for the obvious reasons that the files are on my computer and print commands are constantly being fed to the printer via serial com. This runs the risk of being interrupted and relies heavily on the computer. Hence, why stand-alone printing using SD cards is so popular.

Though one advantage of USB printing is the capability of monitoring the status of the printer, various temperatures, progress, and possibly sending start/stop/speed commands. This, I imagine can be ported to other uses like logging or remote control.

I want to know, is it possible to have monitoring and control communication through USB while it's printing locally from the SD card? Essentially giving me remote control from the computer instead of entering commands and viewing status on the printer itself.

In terms of the firmware, I'm hoping this might just be doing serial.out for status/sensor data (at regular intervals) and monitoring serial inputs from the USB instead of the buttons on the ulticontroller. Though I'm new to this and have no idea how the Marlin firmware behaves in terms of timing and whether the processor has any resources to allocate to this.

EDIT: Oops, this should be in Firmware > Marlin discussions. Can this be moved or should I delete and repost?

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 117 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!