Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · does this nozzle fits the UM2?

The nozzle and heat chamber is a single piece on the UM2 so you cannot purchase just a separate nozzle unfortunately. Get in contact with Ultimaker and see if they can help you out with a new piece.

 

  • Link to post
    Share on other sites
    Posted · does this nozzle fits the UM2?

    Thanks for the link, i will try the software manipulation!

    The nozzle and heat chamber is a single piece on the UM2 so you cannot purchase just a separate nozzle unfortunately. Get in contact with Ultimaker and see if they can help you out with a new piece.

    Oh, i thought it could just be screwed out :???:. So no chance to put a smaller nozzle on the UM2?

    My 0.4 nozzle is not broken, i just want to try print really small tubes and thought a smaller nozzle would help.

     

  • Link to post
    Share on other sites
    • 3 weeks later...
    Posted · does this nozzle fits the UM2?

    If you ask nicely, UM will give you a free second nozzle. Offer to pay for it and they will likely refuse your money. Step 2 is to modify the nozzle for .25mm opening - maybe talk to a machinist or go to a local fablabb or makerspace and see if you can maybe solder the hole closed and then drill it out again.

    I have 2 nozzles for my UM2: .4mm and .7mm

    Unfortunately it is not easy to swap - it takes 20 minutes or so although I get faster each time.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...