Jump to content
Sign in to follow this  
edgar-meyer

feeder plug

Recommended Posts

Posted · feeder plug

My Ultimaker consistently fails with a ~1cm plug blocking PLA feed.

It happens sooner at high or low temperatures and faster x-y print speeds;

I could print a full 3mm over 2 hrs (Cura default settings; 25% speed) with nice-looking thread - then - basta!

I am unable to complete a single print job.

The print gear continues to work; the temperature of the nozzle holds constant - but a plug forms and feed is subsequently blocked

WHY?

and WHAT can I do to fix it?

EM

Share this post


Link to post
Share on other sites
Posted · feeder plug
My Ultimaker consistently fails with a ~1cm plug blocking PLA feed.

It happens sooner at high or low temperatures and faster x-y print speeds;

I could print a full 3mm over 2 hrs (Cura default settings; 25% speed) with nice-looking thread - then - basta!

I am unable to complete a single print job.

The print gear continues to work; the temperature of the nozzle holds constant - but a plug forms and feed is subsequently blocked

WHY?

and WHAT can I do to fix it?

EM

Have a look at http://wiki.ultimaker.com/Jamming

If you let your machine stand too hot for too long, heat will creep up the bowden tube. if you print too hot, liquid PLA will flow up the tube (back flow), also causing a plug. the goal is to print at the lowest acceptable temp for your current print speed (mm/sec) and layer thickness.

Share this post


Link to post
Share on other sites
Posted · feeder plug

Joregen,

thanks for the suggestions and the useful web link

I cleaned and reassembled the extruder - the 6hr print ran for 4 hours before plugging - I had it running at the lowest useful temperature.

How much latitude is there is varying the extrusion speed? It was feeding the entire time, at the lowest possible temperature - so I am at a loss how to compose and execute a complete printing job.

does anyone else have consistent plugging problems???

thanks,

EM

Share this post


Link to post
Share on other sites
Posted · feeder plug
I cleaned and reassembled the extruder - the 6hr print ran for 4 hours before plugging - I had it running at the lowest useful temperature.

How much latitude is there is varying the extrusion speed? It was feeding the entire time, at the lowest possible temperature - so I am at a loss how to compose and execute a complete printing job. does anyone else have consistent plugging problems???

If you have a consistent plug problem, you probably have a gap between the bowden and the brass, or a gap forms after you start printing, because the teeth of the bowden retainer ring have no grip. try printing/installing the owen bowden reinforcement: http://www.thingiverse.com/thing:11864 since that might help to prevent the gap, especially since printing at the lowest possible temp puts a lot of pressure onto the retainer ring and the bowden tube.

Share this post


Link to post
Share on other sites
Posted · feeder plug

also tighten up the aluminum long thumb screws while everything is hot. I found there was some expansion on long print jobs and I ended up with a gap between the bowen and the peek.

Chuck

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 19 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!