Jump to content
Ultimaker Community of 3D Printing Experts

PCB Heated Bed, Calculate track length for any power supply


Recommended Posts

Posted · PCB Heated Bed, Calculate track length for any power supply

Hello,

I've been working on a heated bed and wanted to share with everyone how I found the proper length / width of the PCB track.

I have an extra 12v 6.2 amp power supply laying around. so these are the values I'll be using to figure out the right track length for the power supply.

google PCB track width calculator

http://circuitcalculator.com/wordpress/ ... alculator/

These are the settings

Current 6 Amps <---- Based on your power supply max ouput

Thickness 35 uM or 1oz ft^2 <---- What ever your PCB is.

Temperature Rise 130c <---- This is how much the temperature of the PCB will rise above ambient temp set below

Ambient Temperature 25c <---- Starting temp of the room.

Trace Length XXXXX <---- this setting will be adjusted until the Voltage drop equals your power supply voltage.

80700 Mil's <---- I did mine in mil's and 80700 is the length of

 

===== My Result values based on above Values=====

Results for External Layers in Air:

Required Trace Width 0.750 mm

Resistance 2.00 ohms

Voltage Drop 12.0 volts

Power Loss 72.0 watts

With this you now have your Track length and track width to do a PCB or a Milled CB

Thanks,

Hopes this helps some people.

  • Link to post
    Share on other sites

    • 2 years later...

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...