Jump to content
Ultimaker Community of 3D Printing Experts
Sign in to follow this  

firmware update ulticontroller

Recommended Posts

The Ulticontroller doesn't have its own firmware; it's part of Marlin.

It should be less annoying with the present firmware (default firmware on e.g. Cura 14.06). Otherwise you can use marlinbuilder.robotfuzz.com or even compile your own version which will allow for any (or no) sound you like.

Share this post

Link to post
Share on other sites

thank you for your answer dimensioneer!

ahhh, a new cura version is available - nice!

i downloaded it and updated via cura - but it's still the same sound.

The Ulticontroller says "Ultimaker:13.12 (16 Dec 2013)" - looks like the firmware update wasn't successful?!


Share this post

Link to post
Share on other sites

Uhm... you're right. The firmware included in Cura 14.06 is still the same as four months ago. As Daid updated the Ultimaker branch of the firmware I was assuming he would also include it in Cura 14.06. I was partially wrong. He updated just the version with the heated bed kit.

You might try https://github.com/daid/Cura/raw/SteamEngine/resources/firmware/MarlinUltimaker-250000.hex. Seems to be 4 months old but may include the change of the Ulticontroller sound.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 130 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!