Jump to content
Ultimaker Community of 3D Printing Experts

Cannot connect - avrdude: stk500v2_ReceiveMessage(): timeout


kg1610
 Share

Recommended Posts

Posted · Cannot connect - avrdude: stk500v2_ReceiveMessage(): timeout

Hey All,

Hope you can help - i cannot connect to my printer

avrdude: stk500v2_ReceiveMessage(): timeout

i have built a Prusa i3 > Arduino Mega 2560 + Ramps V1.4

printing fine > life was great .... i had to replace the hot end thermostat and at the same time decided to take the printer apart and polish the frame etc. .. make it more rad.

Got the new thermistor - finished assembly - now i am here with this error when trying to connect via Arduino : avrdude: stk500v2_ReceiveMessage(): timeout

https://www.dropbox.com/s/nmmran0idsjpl8t/Arduino%20error.PNG

any ideas ? please let me know

 

 

  • Link to post
    Share on other sites

    • 1 year later...
    Posted (edited) · Cannot connect - avrdude: stk500v2_ReceiveMessage(): timeout

    I ran into the same problem (ultimaker 2 but should use the same arduino bootloader...).

    avrdude -c arduino ...

    quits with:

    avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xe1

    avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x6e

    ...

    avrdude done.  Thank you.

    avrdude -c stk500v2 ...

    loops with:

    avrdude: stk500v2_ReceiveMessage(): timeout

    Finally:

    avrdude -c wiring ...

    works fine.

    Source: http://www.avrfreaks.net/comment/1523081#comment-1523081

    "-c wiring is just stk500v2 with DTR wiggle."

    Edit: Oops... the Makefile includes an avrdude section with he correct wiring programmer argument...

    I know the topic is super old but I want to give a solution so google can index it and hopefully help others.

    Edited by Guest
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...