Jump to content
Ultimaker Community of 3D Printing Experts

First Test Print - Not Extruding??


jkl66
 Share

Recommended Posts

Posted · First Test Print - Not Extruding??

Hi everyone,

Managed to get a test print going for the Thin Wall Box thing, but the extruder is not extruding any abs plastic?

The extruder runs the tool path but does not extrude any material as it follows the tool path. Is there some sort of setting im missing or something? also the temperature seems to decrease as its running the G-code?

If someone could do a work flow instruction or something which will just allow me to do a test print that would be great!!

I can extrude the when I manually tell it to in the control panel but just now when it runs the G-code file? Any suggestions anyone?!

Thanks everyone!

  • Link to post
    Share on other sites

    Posted · First Test Print - Not Extruding??

    To check:

    1) Is the extruder motor turning during the print? Is the bolt turning with the big gear? (my gear was slipping on my bolt during first prints)

    2) The default start.gcode in some version turns the heater off! Check for M104 or M105 in your generated GCode. If they are there you could use the Temperature plugin of SF to set the temperature. Or remove them from the start.gcode and disable the temparture plugin in SF, so you can use the manual control to set the temperature before printing.

    3) Which firmware are you running, I assume it's the default as you are doing first test prints. (Good, don't upgrade until you get prints to work)

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...