Jump to content
Sign in to follow this  
milehigh3dii

Change Extrusion multiplier and speed during printing on UM2?

Recommended Posts

Posted · Change Extrusion multiplier and speed during printing on UM2?

I'm looking to buy a UM2 and I was just going over all the things I do to help me print with my PBV2 that I have now. I looked thru the online manual, but I didn't see anything about if you can change the speed and volume of filament like I can now in Repetier.

I find it really helpful to be able to change the extrusion multiplier during prints. I do the extrusion calibrations, but sometimes it seems that being able to tweak the multiplier on the first layers with lots of flat areas small flat areas to get the material to lay right (even using Cura as my slicer). Plus with ABS prints with thin and high walls, I like to be able up the extrusion a bit so that it is less prone to delam.

I'm making my own filament too, which isn't as stable in diameter as I'd like (I'm printing the parts for a filawinder right now.)

Being able to change the speed on the fly has really helped when I set the speed to fast for the PB to put down fine details. It also helps to speed up time dependent prints when I need it by x:xx time.

Can you mod these with the control wheel during printing?

 

Share this post


Link to post
Share on other sites
Posted · Change Extrusion multiplier and speed during printing on UM2?

Yes, the front control panel has a 'tune' menu that is available during printing and allows you to change the speed multiplier, flow rate multiplier, head and bed temperature, retraction speed settings, fan speed, and LED brightness while the print continues.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 18 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!