Jump to content

Layers View Not Showing Entire Object


james-preen

Recommended Posts

Posted · Layers View Not Showing Entire Object

Hi,

When I import an stl file into Cura, the image appears fine in the normal view but when I switch to the layers view it does not show the entire object (and when printing it doesn't print the entire object).

Any idea of how to solve this problem?

Thanks,

James

 

  • Link to post
    Share on other sites

    Posted · Layers View Not Showing Entire Object

    Please update your country in your settings "location" field.

    There's lots of possible reasons. First go to xray view. Any areas in red are a potential problem - they indicate that there is either a hole in the model or an extra internal wall that can confuse the slicer.

    You might have to fix the model but usually you can play with the "fix horrible" checkboxes in the expert settings. Usually A or B fixes it. Or some other combination of all the checkboxes. There are 11 combinations (never check A and B at the same time). If none of the 11 combinations fix it you have to fix the model.

    There are other possible causes (polygons smaller than .1mm in rare cases can confuse the slicer) but it's probably just a non-manifold model (not solid).

     

  • Link to post
    Share on other sites

    Posted · Layers View Not Showing Entire Object

    I believe (but not entirely sure), thin structures will show in the 3D view but the slicer will remove them if they are less than (or possibly equal to) 0.4mm so they won't show in the layers view. I believe the layers view is largely driven by the output of the slicer which is a separate process. So it's possible that Cura will show something in the 3D view and not realize it was removed by the slicer.

    If the missing items are very thin, you need to make them .4mm (or slightly larger than .4mm) so the slicer doesn't remove them.

     

  • Link to post
    Share on other sites

    Posted · Layers View Not Showing Entire Object

    I import my stl file to cura.  With multiple items in the file, cura only circle several item in file but will not show them all.  Therefore my print prints what is inside the cura border and starts balling up when the head movies outside the border because the head is too high at that point.  Any suggestions or setting that I can change to help this problem.  I have attached the file so you can see what happens.

    UFO3 Clear Parts.gcode

  • Link to post
    Share on other sites

    Posted · Layers View Not Showing Entire Object
    8 hours ago, Bearcat13 said:

    Any suggestions

    Please save and share a project, not the gcode file.

    File -> Save project...

     

    With a project we get both the model and your current configuration and settings.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...