Jump to content
Ultimaker Community of 3D Printing Experts

links to open source sellers

Recommended Posts

What country do you live in?

Maybe there's a FabLab somewhere near you. You can get the panels cut there for a good price.

Sometimes you can also have acrylic parts lasercut directly from the suppliers.

I'd recommend getting an Ultimaker 1 instead of a 2. The UM2 is not made to be self-sourced.

(Note that Open Source has nothing to do with self-sourcing parts).

You should also consider getting a different hotend right away. This makes finding the right parts easier, and you can get something more reliable from the beginning. Have a look at the E3Dv6 hotend for example.

You'll need to have someone print a mount for you, but that can easily be arranged through www.3dhubs.com. There's also a "please print this for me" section here in the forum.

Do you have the possibility to order stuff through your company / workplace? There is an industrial supplier called Misumi where you can get most of the metal hardware parts (shafts, bearings, leadscrew and so on) in awesome quality. Not comparable to the stuff you get from reprap stores!

But you can't make a customer account as a private person, only as a corporate customer...


You'll find dozens of reprap shops from all around the world, so we'll need to know where you live before we can make any recommendations...


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 114 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!