Jump to content
Ultimaker Community of 3D Printing Experts

Ulti-evening 25th of August 2014


Recommended Posts

Posted · Ulti-evening 25th of August 2014

Hi Everyone,

 

Next week it is time for the next Ulti-evening.

Because last edition was such a success we want to keep the interactive part as the core of the ulti-evening.

In that regard we will host the next edition in collaboration with Colorfabb. They will do a short presentation about their work and innovative materials.

Colorfabb will also bring some sample packages which will include:

XT ! / Woodfill / Glowfill / Bronzefill

 

Together we will make some prints and hopefully you, as a user, will gain some extra insight on how different materials need different profiles and what different materials feel and look like.

 

These sample packages will be handed out free of charge :)

 

Some more practical information about upcoming Ulti-evening:

 

Date: 25-08-2014

Time: 17.00 - 22.00

Location: ProtoSpace, Utrecht

 

17.00 - 18.00 Arrival (bring your Ultimaker) and order food if you are hungry.

18.00 - 18.30 Short introduction from Colorfabb

18.30 - 19.00 Food

19.00 - 22.00 Printing time!

 

Looking forward seeing you there!

 

the documentation of the previous workshop (choco-hack) is still in the making but will be published as soon as it is finished.

 

  • Link to post
    Share on other sites
    • Replies 68
    • Created
    • Last Reply

    Top Posters In This Topic

    Posted · Ulti-evening 25th of August 2014

    Wowowowow, this sounds awesome! I've wanted to try bronzefill so bad and learn about the other fills! I must try to make it, not sure if I'll be able to though :'( Will this Ulti-evening also be filmed?

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    Sander: Would it be possible perhaps to bring some UM2 spare parts? I'd love a spare teflon. Obviously I will pay for it in cash. Also I was promised a replacement fan for the right side fan (per BCE-717-50275) but I haven't heard anything anymore. Perhaps it was a misunderstanding but it would be nice to get rid of the whining sound.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    That is a intresting event, i will be there, my first event :)

    Patrick

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    Guess I need to start working on my id tag ;-) But with so many other things needing attention it might just be a paper one.

    See you all there and since this one does not sound so scarry (in hindsight last one was neither) I will see if I can borrow father's car to bring my precious along :-)

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    Guess I need to start working on my id tag :wink:

     

    @Dirkels: I was thinking exactly the same thing :)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    mmm I am missing all the colors for printing a badge....

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    To bad it's a work day i won't be able to come :( i have a 4h drive from work...

    Do you consider doing such an event during the weekend once in a while?

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    Bump the request for doing it on a weekend. Saturday would be ideal :)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    Sander: Would it be possible perhaps to bring some UM2 spare parts? I'd love a spare teflon. Obviously I will pay for it in cash. Also I was promised a replacement fan for the right side fan (per BCE-717-50275) but I haven't heard anything anymore. Perhaps it was a misunderstanding but it would be nice to get rid of the whining sound.

     

    We are looking into possibilities of making a selection of parts or filaments available for purchase on the ulti evenings but for now we are facing some other challenges that have priority over this.

    But making this available is on my radar too. I will see if there is a temporarily solution..

    I will also look into your ticket and see whats up with your fan.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    I'm going, have I to sign up? or pay a entrance fee?

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    No need to sign up and free acces :)

    The only thing is if you want to join us for dinner (Chinese) it is approx. €10

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    We are looking into possibilities of making a selection of parts or filaments available for purchase on the ulti evenings but for now we are facing some other challenges that have priority over this.

     

    No problem, all we can do is ask :)

    I won't enjoy the evening any less because of it.

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    One idea for more "interactive"/workshop-like activities during the event is postprocessing prints. Polishing bronzefill, sanding PLA/PHA etc.

    Also it might be a good idea to bring lots of reinforced teflon parts, because Colorfabb is going to release new (non-transparent, colored) XT filaments that print at the same high temperature. I'll have two of those parts please... Daid, did you finish the cookies you got last time yet?

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    looking forward to it.. i'll be there later (after 19:30) but very interested...

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    "because Colorfabb is going to release new (non-transparent, colored) XT filaments that print at the same high temperature"

     

    Advise temps are indeed high, 240 to 260 degrees.......

    I hope I can make it on time from work......

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    Also it might be a good idea to bring lots of reinforced teflon parts, because Colorfabb is going to release new (non-transparent, colored) XT filaments that print at the same high temperature. I'll have two of those parts please... Daid, did you finish the cookies you got last time yet?

     

    The teflon parts seem to be one of the more sensitive things of the printers in general, which is why I asked for least 1 spare for my UM2 ;)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    I will be there too. After 1 week printing with the U2 I have a lot of questions ;-)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    I will be there too. After 1 week printing with the U2 I have a lot of questions :wink:

     

    You are more then welcome and hopefully we will be able to answer all of them :)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    Aw, snap... I'm not going to be able make it :-(

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    @Leon: cool. Last time I was the only person with an UM2, glad that I won't be this time :) (Felt a bit singled out :p)

     

  • Link to post
    Share on other sites
    Posted · Ulti-evening 25th of August 2014

    Ow I expected more UM2 owners. It is always nice to no know what other brands can do. The UM2 is from the organization where I work for and I want also a printer for in my bedroom ;-) I see you there!

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    ×
    ×
    • Create New...