Jump to content
Ultimaker Community of 3D Printing Experts

Ultimaker froze 1 hour into print

Recommended Posts

Posted · Ultimaker froze 1 hour into print

Just came back to work after the weekend, expecting to see a pop can sized print that was projected to take over 20 hours. Instead, I found it had just stopped in place 1 hour into the print, with a burnt spot where the nozzle sat all weekend at ABS extrusion temperature, and the readout right where it was an hour into the print.

I aborted, and it went right to home position like nothing out of the ordinary. Right now I'm doing a material change, to see if the nozzle is just one block of carbon, which is what I expect. (Lucked out, I guess: It extruded black, then tan, then cleared up.)

Data error on the SD card? Processor glitch? Any ideas?


  • Link to post
    Share on other sites
    Posted · Ultimaker froze 1 hour into print

    Guess I'll reformat the SD card, then, and try again.

    Perhaps a watchdog timer is needed, to abort automatically when this sort of thing happens. Some materials would make a real mess of your nozzle if they sat at extrusion temperature all weekend.


    I agree that a watchdog timer might be useful. On the other hand no 3D printer should be left unattended for a whole weekend. It's something one wouldn't do with a burning candle, right?


  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 4 replies
    • Create New...