Jump to content
Ultimaker Community of 3D Printing Experts

Print Table Glass delaminated with ColorFabb XT


tomilla
 Share

Recommended Posts

Posted · Print Table Glass delaminated with ColorFabb XT

Hi Everybody,

has anyone experienced the same problem: Printed with ColorFabb XT , a piece has come loose from the glass plate when detached the print.

So the class plate has to be reversed.

Is it a problem with the glass? or should i use tape?

Martin

 

  • Link to post
    Share on other sites

    Posted · Print Table Glass delaminated with ColorFabb XT

    What bed temperature did you guys use?

    I had no problems with last year's XT and 75°C... I could imagine the necessary temperature is somewhat higher with this year's XT...

     

  • Link to post
    Share on other sites

    Posted · Print Table Glass delaminated with ColorFabb XT

    I had the same, and since I'm still using XT but always let it cool till the part gets loose by itself, I'll never put pressure on it anymore or use a knive .... If the ambient temp is to high (higher than 20 celsius) put your glass plate a few minutes in the fridge ....

     

  • Link to post
    Share on other sites

    Posted · Print Table Glass delaminated with ColorFabb XT

    Happenned to me too but not with XT.

    Too much glue, and not waiting enough to take the piece off the plate was the cause for me.

    No i always let it cool down enough (especially for large objects) so that i barely have to use force to pull the print of the bed

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...